Zoom ZF8N Operation Manual page 86

Input limiter
Setting the threshold
This sets the level at which the limiter begins operating.
5.
Use to select
and press .
6.
Use to adjust the
setting, and press
HINT
This can be set from −16 to −2 dBFS.
NOTE
This setting can be made when On/Off is set to On (Normal).
86
(continued)
Threshold
,
.
Setting the attack time
This sets the amount of time until limiting starts after the
input signal exceeds the threshold.
5.
Attack
Use to select
Time
, and press
6.
Use to adjust the time,
and press .
HINT
This can be set from 1 to 4 ms.
NOTE
This setting can be made when On/Off is set to On (Normal).
.