Integrated Peripherals - Gigabyte 8S651M-RZ User Manual

Integrated Peripherals

CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
IDE1 Conductor Cable
IDE2 Conductor Cable
On-Chip Primary PCI IDE
On-Chip Secondary PCI IDE
AC97 Audio
Onboard LAN Device (* )
System Share Memory Size
USB Controller
USB Legacy Support
Init Display First
Onboard Serial Port A
Onboard Serial Port B
Serial Port B Mode
Onboard Parallel Port
Parallel Port Mode
x EPP Mode Select
ECP Mode Use DMA
Game Port Address
Midi Port Address
Midi Port IRQ
higf : Move
Enter: Select
F5: Previous Values
IDE1 Conductor Cable
Auto
ATA66/100/133
ATA33
IDE2 Conductor Cable
Auto
ATA66/100/133
ATA33
On-Chip Primary PCI IDE
Enabled
Disabled
On-Chip Secondary PCI IDE
Enabled
Disabled
AC97 Audio
Enabled
Disabled
"*" For 8S651M-RZ only.
8S651M-RZ Series Motherboard
Integrated Peripherals
+/-/PU/PD: Value
F6: Fail-Save Default
Will be automatically detected by BIOS.(Default Value)
Set IDE1 Conductor Cable to ATA66/100/133 (Please m ake sure your IDE
device and cable is compatible with ATA66/100/133).
Set IDE1 Conductor Cable to ATA33 (Please make sure your IDE device and
cable is com patible with ATA33).
Will be automatically detected by BIOS. (Default Value)
Set IDE2 Conductor Cable to ATA66/100/133 (Please m ake sure your IDE
device and cable is compatible with ATA66/100/133).
Set IDE2 Conductor Cable to ATA33 (Please make sure your IDE device and
cable is com patible with ATA33).
Enable onboard 1st channel IDE port. (Default value)
Disable onboard 1st channel IDE port.
Enable onboard 2nd channel IDE port. (Default value)
Disable onboard 2nd channel IDE port.
Enable onboard AC'97 audio function. (Default value)
Disable this function.
- 26 -
[Auto]
Item Help
[Auto]
Menu Level u
[Enabled]
[Auto]
[Enabled]
Auto-detect IDE cable type
[Enabled]
[Enabled]
[ATA66/100/133]
[32MB]
Set Conductor cable to
[Enabled]
ATA66/100/133
[Disabled]
(80-pins)
[AGP]
[3F8/IRQ4]
[ATA33]
[2F8/IRQ3]
Set Conductor cable to
[Normal]
ATA33(40-pins)
[378/IRQ7]
[ECP]
EPP1.7
[3]
[201]
[330]
[10]
F10: Save ESC: Exit
F7: Optimized Defaults
F1: General Help