Table of Contents
Advertisement
4) SYS_FAN (System FAN Connector)
This connector allows you to link with the cooling fan on the system case to lower the system
temperature.
5) IDE1/ IDE2(IDE1/IDE2 Connector)
Please connect first harddisk to IDE1 and connect CDROM to IDE2.
The red stripe of the ribbon cable must be the same side with the Pin1.
6) FDD (Floppy Connector)
Please connect the floppy drive ribbon cables to FDD. It supports 360K,720K,1.2M,1.44M and
2.88M bytes floppy disk types.
The red stripe of the ribbon cable must be the same side with the Pin1.
Pin No. Definition
1
GND
1
2
+12V
3
Sense
4 0
3 9
2
1
IDE2
IDE1
3 3
3 4
1
2
- 15 -
Hardware Installation Process
Advertisement
Table of Contents
