Integrated Peripherals - Gigabyte GA-686NX User Manual

·
Resources Controlled by
The default value is Manual.
Manual User can set the PnP resourse (I/O Address, IRQ & DMA
channels) used by legacy ISA DEVICE.
Auto BIOS automaticly use these PnP resoures.
·
IRQ (3,4,5,7,9,10,11,12,14,15),DMA(0,1,3,5,6,7) assigned to
The default value is "Legacy ISA" or "PCI/ISA PnP".
Legacy ISA The resource is used by Legacy ISA device.
PCI/ISA PnP The resource is used by PCI/ISA PnP device (PCI or ISA).

4.10. INTEGRATED PERIPHERALS

µ
·
IDE HDD Block Mode
The default value is Enabled.
Enabled Enable IDE HDD Block Mode
Disabled Disable IDE HDD Block Mode
·
IDE Primary Master PIO (for onboard IDE 1st channel).
The default value is Auto.
Auto BIOS will automatically defect the IDE HDD Accessing mode.
§
Figure 4.7: Load Setup Defaults
4-19
BIOS Configuration