Advanced Bios Features - Gigabyte 8S651M-RZ User Manual

Advanced BIOS Features

CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
First Boot Device
Second Boot Device
Third Boot Device
Boot Up Floppy Seek
Password Check
higf : Move
Enter: Select
F5: Previous Values
First / Second / Third Boot Device
Floppy
LS120
HDD-0~3
SCSI
CDROM
ZIP
USB-FDD
USB-ZIP
USB-CDROM
USB-HDD
LAN
Disabled
Boot Up Floppy Seek
During POST, BIOS will determine the floppy disk drive installed is 40 or 80 tracks. 360K type is
40 tracks 720K, 1.2M and 1.44M are all 80 tracks.
Enabled BIOS searches for floppy disk drive to determine it is 40 or 80 tracks. Note
that BIOS can not tell from 720K, 1.2M or 1.44M drive type as they are
all 80tracks.
Disabled BIOS will not search for the type of floppy disk drive by track number. Note
that there will not be any warning message if the drive installed is 360K.
(Default value)
Password Check
System The system will not boot and will not access to Setup page if the correct
password is not entered at the prompt.
Setup The system will boot but will not access to Setup page if the correct password
is not entered at the prompt. (Default value)
Advanced BIOS Features
[Floppy]
[HDD-0]
[CDROM]
[Disabled]
[Setup]
+/-/PU/PD: Value
F6: Fail-Save Default
Select your boot device priority by Floppy.
Select your boot device priority by LS120.
Select your boot device priority by HDD-0~3.
Select your boot device priority by SCSI.
Select your boot device priority by CDROM.
Select your boot device priority by ZIP.
Select your boot device priority by USB-FDD.
Select your boot device priority by USB-ZIP.
Select your boot device priority by USB-CDROM.
Select your boot device priority by USB-HDD.
Select your boot device priority by LAN.
Select your boot device priority by Disabled.
- 25 -
Menu Level}
Select Boot Device
priority
[Floppy]
Boot from floppy
[LS120]
Boot from LS120
[HDD-0]
Boot from First HDD
[HDD-1]
Boot from Second HDD
F10: Save ESC: Exit
F7: Optimized Defaults
Item Help
F1: General Help
BIOS Setup