Load Optimized Defaults; Set Supervisor/User Password - Gigabyte 8S651M-RZ User Manual

Load Optimized Defaults

CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
}
Standard CMOS Features
}
Advanced BIOS Features
} Integrated Peripherals
}
Power Management Setup
}
PnP/PCI Configurations
}
PC Health Status
}
Frequency/Voltage Control
ESC: Quit
F8: Q-Flash
Selecting this field loads the factory defaults for BIOS and Chipset Features which the system autom atically
detects.

Set Supervisor/User Password

CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
}
Standard CMOS Features
}
Advanced BIOS Features
}
Integrated Peripherals
}
Power Management Setup
}
PnP/PCI Configurations
}
PC Health Status
}
Frequency/Voltage Control
ESC: Quit
F8: Q-Flash
When you select this function, the following message will appear at the center of the screen to assist you
in creating a password.
Type the password, up to eight characters, and press <Enter>. You will be asked to confirm the
password. Type the password again and press <Enter>. You may also press <Esc> to abort the
selection and not enter a password.
To disable password, just press <Enter> when you are prompted to enter password. A m essage
"PASSWORD DISABLED" will appear to confirm the password being disabled. Once the password is
disabled, the system will boot and you can enter Setup freely.
The BIOS Setup program allows you to specify two separate passwords:
SUPERVISOR PASSWORD and a USER PASSWORD. When disabled, anyone may access all BIOS
Setup program function. When enabled, the Supervisor password is required for entering the BIOS
Setup program and having full configuration fields, the User password is required to access only basic
items.
If you select "System " at "Password Check" in Advance BIOS Features Menu, you will be prom pted
for the password every time the system is rebooted or any tim e you try to enter Setup M enu.
If you select "Setup" at "Password Check" in Advance BIOS Features Menu, you will be prompted only
when you try to enter Setup.
8S651M-RZ Series Motherboard
Load Optimized Defaults (Y/N)? N
Load Optimized Defaults
Enter Password:
Change/Set/Disable Password
- 34 -
Top Performance
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
higf : Select Item
F10: Save & Exit Setup
Top Performance
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
higf : Select Item
F10: Save & Exit Setup