Frequency/Voltage Control - Gigabyte 8S651M-RZ User Manual

SYSTEM FAN Fail Warning
Disabled
Enabled

Frequency/Voltage Control

CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
CPU Clock Ratio
Linear Frequency Control
x CPU Clock (MHz)
x DRAM Clock (MHz)
x AGP Clock (MHz)
x PCI Clock (MHz)
higf : Move
Enter: Select
F5: Previous Values
CPU Clock Ratio
This setup option will automatically assign by CPU detection.
For Willamette CPU:
8X~23X default: 14X
For C-Stepping P4:
8X,10X~24X default: 15X
For Northwood CPU:
12X~24X default: 16X
The option will display "Locked" and read only if the CPU ratio is not changeable.
Linear Frequency Control
Disabled
Enabled
CPU Clock
100~355
If you use FSB400 Pentium 4 processor, please set "CPU Clock" to 100MHz.If you use FSB533
Pentium 4 processor, please set "CPU Clock" to 133MHz. If you use FSB800 Pentium 4
processor, please set "CPU Clock" to 200M Hz.
Incorrect using it may cause your system broken. For power End-User use only!
DRAM Clock (MHz)
Please set DRAM Clock according to your requirem ent.
If you use DDR200 DRAM module, please set "DRAM Clock(MHz)" to 200. If you use DDR333
DRAM module, please set "DRAM Clock(M Hz)" to 333.
Incorrect using it may cause your system broken. For power End-User use only!
8S651M-RZ Series Motherboard
Fan Warning Function Disable. (Default value)
Fan Warning Function Enable.
Frequency/Voltage Control
[10X]
[Disabled]
100
AUTO
AUTO
AUTO
+/-/PU/PD: Value
F6: Fail-Save Default
Disable this function. (Default value)
Enable this function.
Select CPU Clock to 100MHz~355M Hz.
- 32 -
Item Help
Menu Level
F10: Save ESC: Exit
F7: Optimized Defaults
u
F1: General Help