Integrated Peripherals - Gigabyte GA-D425TU User Manual

2-6

Integrated Peripherals

CMOS Setup Utility-Copyright (C) 1984-2010 Award Software
SATA AHCI Mode
Azalia Codec
Onboard H/W LAN
Green LAN
 SMART LAN
Onboard LAN Boot ROM
Onboard Serial Port 1
Onboard Serial Port 2
Onboard Parallel Port
Parallel Port Mode
USB 1.0 Controllers
USB 2.0 Controllers
USB Keyboard Function
USB Mouse Function
USB Storage Function
higf: Move Enter: Select
F5: Previous Values
SATA AHCI Mode (NM10 Chipset, SATA2_0/1 Connectors)
A llows you to decide whether to configure the SATA controllers integrated in the NM10 Chipset to AHCI
mode.
IDE Configures the SATA controllers to IDE mode. (Default)
AHCI C onfigures the SATA controllers to AHCI mode. Advanced Host Controller Interface (AHCI) is
an interface specification that allows the storage driver to enable advanced Serial ATA features
such as Native Command Queuing and hot plug.
Azalia Codec
Enables or disables the onboard audio function. (Default: Auto)
If you wish to install a 3rd party add-in audio card instead of using the onboard audio, set this item to
Disabled.
Onboard H/W LAN
Enables or disables the onboard LAN function. (Default: Enabled)
If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to
Disabled.
Green LAN
When the onboard LAN function and Green LAN are enabled, the system will dynamically detect if a
LAN cable is connected or not. If not, the corresponding LAN controller will be disabled automatically.
(Default: Disabled)
BIOS Setup
Integrated Peripherals
[IDE]
[Auto]
[Enabled]
[Disabled]
[Press Enter]
[Disabled]
[3F8/IRQ4]
[2F8/IRQ3]
[378/IRQ7]
[SPP]
[Enabled]
[Enabled]
[Disabled]
[Disabled]
[Enabled]
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
- 32 -
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults