Integrated Peripherals - Gigabyte GA-EP31-DS3LP User Manual

Lga775 socket motherboard for intel core processor family/ intel pentium processor family/intel celeron processor family
Table of Contents

Advertisement

2-5

Integrated Peripherals

On-Chip Primary PCI IDE
On-Chip SATA Mode
x PATA IDE Set to
SATA Port 0/2 Set to
SATA Port 1/3 Set to
USB Controller
USB 2.0 Controller
USB Keyboard Support
USB Mouse Support
Legacy USB storage detect
Azalia Codec
Onboard H/W LAN
 SMART LAN
Onboard LAN Boot ROM
Onboard Serial Port 1
Onboard Parallel Port
Parallel Port Mode
: Move
Enter: Select
F5: Previous Values
On-Chip Primary PCI IDE
Enables or disables the integrated IDE controller. (Default: Enabled)
On-Chip SATA Mode
Configures the integrated SATA controller.
Disabled
Auto
Combined
Enhanced
Non-Combined
PATA IDE Set to
This item is configurable only if the On-Chip SATA Mode is set to Combined.
Ch.0 Master/Slave Sets the IDE channels to Ch. 0 Master/Slave. (Default)
Ch.1 Master/Slave Sets the IDE channels to Ch. 1 Master/Slave.
Disabled
SATA Port 0/2 Set to
This value is dependent on the On-Chip SATA Mode and PATA IDE Set to settings.
When PATA IDE Set to is configured to Ch. 1 Master/Slave, this option will be automatically set
to Ch. 0 Master/Slave.
CMOS Setup Utility-Copyright (C) 1984-2008 Award Software
Integrated Peripherals
+/-/PU/PD: Value
F6: Fail-Safe Defaults
Disables the integrated SATA controller.
Lets BIOS set SATA devices to Combined or Enhanced mode.
If your onboard SATA controller is automatically configured to Combined
mode, you can manually re-configure it to Enhanced mode as needed.
(Default)
Sets all SATA devices to operate in PATA mode. Combined allows a
maximum of 4 ATA devices to be used simultaneously: two PATA devices
plus two SATA devices.
Sets all SATA devices to operate in SATA mode.
Sets all SATA devices to operate in PATA mode and disables the integrated
IDE controller.
Disables the integrated IDE controller when Non-Combined is selected.
[Enabled]
[Auto]
Ch.0 Master/Slave
Ch.2 Master/Slave
Ch.3 Master/Slave
[Enabled]
[Enabled]
[Disabled]
[Disabled]
[Enabled]
[Auto]
[Enabled]
[Press Enter]
[Disabled]
[3F8/IRQ4]
[378/IRQ7]
[SPP]
F10: Save
- 39 -
Item Help
Menu Level
ESC: Exit
F1: General Help
F7: Optimized Defaults
BIOS Setup

Advertisement

Table of Contents
loading

Table of Contents