Pnp/Pci Configurations - Gigabyte 8S651M-RZ User Manual

Power LED in S1 state
Blinking In standby mode(S1), power LED will blink. (Default Value)
Dual/OFF In standby mode(S1):
a. If use single color LED, power LED will turn off.
b. If use dual color LED, power LED will turn to another color.

PnP/PCI Configurations

CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
PCI 1 IRQ Assignment
PCI 2 IRQ Assignment
PCI 3 IRQ Assignment
higf : Move
Enter: Select
F5: Previous Values
PCI 1 IRQ Assignment
Auto
3,4,5,7,9,10,11,12,14,15
PCI 2 IRQ Assignment
Auto
3,4,5,7,9,10,11,12,14,15
PCI 3 IRQ Assignment
Auto
3,4,5,7,9,10,11,12,14,15
8S651M-RZ Series Motherboard
PnP/PCI Configurations
[Auto]
[Auto]
[Auto]
+/-/PU/PD: Value F10: Save
F6: Fail-Save Default
Auto assign IRQ to PCI 1. (Default value)
Set IRQ 3,4,5,7,9,10,11,12,14,15 to PCI 1.
Auto assign IRQ to PCI 2. (Default value)
Set IRQ 3,4,5,7,9,10,11,12,14,15 to PCI 2.
Auto assign IRQ to PCI 3. (Default value)
Set IRQ 3,4,5,7,9,10,11,12,14,15 to PCI 3.
- 30 -
Item Help
Menu Level}
Device(s) using this
INT:
Display Cntrlr
-Bus 1 Dev 0 Func 0
ESC: Exit F1: General Help
F7: Optimized Defaults