Gestetner C7528 Software Manual page 70

Preparing for Printing
If you click [High], or [Custom], and specify [Link] in the [Custom Settings] dialog
box, enter the Bluetooth password. For information about entering the pass-
word, see p.70 "Printing in the Security
For all other security modes and custom settings, no password is required.
❒ For information about each mode, see the manuals provided with the utility.
D
Click [OK].
Close the [Security Mode] dialog box.
For details about the security mode, see 3Com Bluetooth Connection Man-
ager Help. For details about the password entry which is required to trans-
mit print jobs, see
Printing in the Security Mode
A
Send the print job to the printer in use.
Depending on the computer configuration, the [Connect] dialog box may ap-
pear. If it does, use it to establish the network connection.
B
The [Authentication] dialog box appears.
C
Enter the Bluetooth password, and then click [OK].
As the Bluetooth password, enter the last four digits of the printer's serial num-
ber. You can find the serial number on the label on the back of the printer. For
example, if the serial number is 00A0-001234, the Bluetooth password is
1234.
D
The print job is sent.
❒ The Bluetooth password differs for each printer and cannot be changed.
Mode".
p.70 "Printing in the Security Mode".
70