Gestetner C7528 Software Manual page 169

Making Printer Settings Using the Control Panel
❖ Thick Paper
Set the thick paper configuration.
Thick Paper 1, Thick Paper 2, Thick Paper 3, Thick Paper 4
Only the bypass tray can accept thick paper.
For details, see "Type of Paper and Other Media", Maintenance Guide.
❖ Special Paper
Specify a type of special paper for each of the following trays:
Tray 1, Tray 2, Tray 3, Tray 4, Bypass Tray
For information about the types of ordinary paper, see the Maintenance
Guide.
Special Paper1, Special Paper2, Special Paper3, Special Paper4
For details, see "Type of Paper and Other Media", Maintenance Guide.
❖ Del. All Temp
This appears on the menu only when the hard disk is installed. Use this func-
tion to delete document data for sample printing or confidential document
printing all at once.
❖ Del. All Stored
This appears on the menu only when the hard disk is installed. Use this func-
tion to delete saved document data all at once.
❖ HD Format
Appears when the hard disk is installed. If the format is necessary, use
"HD Format".
❖ WL.LAN Signal
You can check the signal strength when using wireless LAN.
For details about displaying the signal strength, see
signal strength".
❖ 4C.Graphic Mode
Use this menu item to select a quantity of overlap between the colors CMYK
when printing. If characters or ruled lines blur, selecting "Text Priority" may im-
prove the situation. In general, select "Photo Priority".
• Text Priority
• Photo Priority
❒ Default: Photo Priority
❖ Fuser Temperat.
Use this menu item to select a temperature at which the fuser will be fixed to
paper being printed.
In general, select "600dpi Norm. Ppr".
p.165
p.166 "Displaying the
169