Gestetner C7528 Software Manual page 223

Monitoring and Configuring the Printer
msh> dns 1 server 192.168.15.16
• You can register up to three DNS server numbers.
• Applicable address numbers are 1 to 3. You can register up to three ad-
dresses.
• You cannot use "255.255.255.255" as the DNS server address.
❖ Dynamic DNS function setting
msh> dns "interface_name" ddns {on|off}
• You can set the dynamic DNS function "active" or "inactive".
• {on} means "active" and {off} means "inactive".
• ip1394 can be specified only when the IEEE 1394 interface is installed.
• wlan can be specified only when the IEEE 802.11b interface is installed.
Interface name
ether
ip1394
wlan
❖ Specifying the record overlap operation
msh> dns overlap {update|add}
• You can specify operations performed when records overlap.
• update
To delete old records and register new records.
• add
To add new records and store the old records.
• When CNAME overlaps, it is always changed, irrespective of settings.
❖ CNAME registration
msh> dns cname {on|off}
• You can specify whether to register CNAME.
• {on} means "active" and {off} means "inactive".
• The CNAME registered is the default name beginning with rnp. CNAME
cannot be changed.
❖ A records registration
msh> dns arecord {dhcp|own}
• {dhcp}
You can specify the method of registering an A record when the dynamic
DNS function is enabled and DHCP is used.
• {own}
To register an A record using the printer as the DNS client.
Interface configured
Ethernet interface
IEEE 1394 interface
IEEE 802.11b interface
223