Gestetner C7528 Software Manual page 160

Making Printer Settings Using the Control Panel
❖ Paper Type
If you use various types of paper, select the paper type for tray 1, tray 2, tray
3, tray 4 or bypass tray.
For details about types of paper loaded in each tray, see "Paper and Other
Media Supported by This Printer", Maintenance Guide.
❖ Tray 1, 2, 3, 4
Plain Paper, Recycled Paper, Special Paper, Color Paper, Letterhead,
Preprinted
❖ Bypass Tray
Plain Paper, Recycled Paper, Special Paper, Color Paper, Letterhead,
Preprinted, Transparency, Thick Paper
❒ Default : Plain Paper
❒ Only the installed trays appear on the display panel.
❖ Aut. Tray Select
If you select [Auto Tray Select], paper trays can be selected according to the
printer driver-specified paper size and type. Default is [On].
❖ Tray Priority
You can set a tray to be checked first when [Auto Tray Select] is selected in [Pa-
per Source] from the printer driver.
• Tray 1, Tray 2, Tray 3, Tray 4
❒ Default : Tray 1
❒ Only installed trays appear on the display panel.
❒ It is recommended that you load paper of the size and orientation you use
most frequently in the tray selected in [Tray Priority].
160