Gestetner C7528 Software Manual page 136

Other Print Operations
❒ The Spool Printing function is available for data received using diprint, lpr, ipp,
ftp, and smb.
❒ When using diprint, the Spool Printing function cannot be used with bidirec-
tional communication.
❒ The domain reserved for spool printing is about 1 GB.
❒ When Spool Printing is on, the size of a single print job cannot exceed 500
MB.
❒ When sending print jobs spooled from several computers, up to one diprint
job, 10 lpr jobs, one ipp job, one ftp job, and one smb job can be spooled. Jobs
exceeding this spooling capacity cannot be executed. It is necessary to wait
to add new jobs.
❒ First pages takes longer to print when using spool printing.
❒ With Spool Printing, the computer is freed from print processing earlier, even
when processing a large amount of data.
❒ Spool jobs stored in the printer can be viewed or deleted using Web Image
Monitor.
For information about the "spoolsw clear job" command on the telnet, see
p.240 "spoolsw".
Setting Spool Printing
Spool printing settings can be made using telnet or Web Image Monitor.
• Using Web Image Monitor
In the[Device Settings] on the [Configuration] menu, click [System].
For details, see Web Image Monitor Help.
• Using telnet
Enter "spoolsw spool on".
For details, see p.240
Checking or deleting spooled jobs using Web Image Monitor
Follow the procedure below to check or delete spooled jobs using Web Image
Monitor.
A
Open a Web browser.
B
Enter "http: //(printer's address)/" in the address bar to access the print-
er whose settings you want to change.
Top Page of Web Image Monitor appears.
C
Click [Login].
The dialog box for entering the user name and password appears.
"spoolsw".
136