Gestetner C7528 Software Manual page 265

Monitoring and Configuring the Printer
Message
exiting
Exit pserver
Frametype =<frame type name>
httpd start.
inetd start.
IPP cancel-job: permission denied.
ipp disable.
ipp enable.
IPP job canceled. jobid=%d.
LeaseTime=<lease time>(sec), Renew-
Time=<renew time>(sec).
Login to fileserver <file server name>
(<IPX|IP>,<NDS|BINDERY>)
Memory allocate error.
Name registration success. WINS Serv-
er=<WINS server sddress> NetBIOS
Name=<NetBIOS name>
Name registration success in Broadcast
name=<NetBIOS name>
Name registration failed. name=<NetBIOS
name>
nbtd start.
npriter start. (NetWare)
nwstart start. (NetWare)
Open log file <file name>
papd start. (AppleTalk)
Problem and solutions
The lpd service has ended and the system is
exiting the process.
(In the print server mode) The print server
function is disabled because the necessary
print server settings have not been made.
The frame type name is configured to be used
on NetWare.
The httpd service has started.
The inetd service has started.
The printer could not authenticate the name of
the user attempting to cancel a job.
Printing with ipp is disabled.
Printing with ipp is enabled.
The spooled job was canceled due to error or
user request.
The resource lease time received from the
DHCP server is displayed in [lease time] in
seconds. The renewal time is displayed in [re-
new time] in seconds.
(In the print server mode) Login to the file serv-
er is in the NDS or BINDERY mode.
Data cannot be obtained.
Disconnect the USB cable, and then connect
it.
Name registration of <WINS server sddress>
was successful.
Name registration by Broadcast name of <Net-
BIOS name> was successful.
Name registration of <NetBIOS name> failed.
Set unique NetBIOS name.
The nbtd service has started.
(In the remote printer mode) The NetWare ser-
vice has started.
The service for NetWare protocol stack setting
has started.
(In the print server mode) The specified log file
has been opened.
The AppleTalk print service has started.
265