Gestetner C7528 Software Manual page 175

Making Printer Settings Using the Control Panel
❖ Energy Saver 2
You can specify how many minutes for the energy saver mode.
❖ E. Saver2 On/Off
You can specify whether or not to switch E. Saver2.
• On
• Off
❒ Default: On
❒ When the printer switches to the Energy Saver 2 mode, the Power indi-
cator goes off, while the online indicator stays lit.
❖ E. Saver2 Timer
You can select the lead time needed to switch to the Energy Saver 2 mode.
The Energy Saver 2 mode reduces electric power consumption.
• 5 minutes
• 15 minutes
• 30 minutes
• 45 minutes
• 60 minutes
❒ Default: 60 minutes
❒ When the printer switches to the Energy Saver 2 mode, the Power indi-
cator goes off, while the Online indicator stays lit and [Energy Saver 2
Mode] appears.
❖ Auto Reset Time
Specify whether to revert to the initial configuration at certain interval. This
also specifies the interval to reset the configuration.
❖ Auto Reset
• On
• Off
❒ Default: On
❖ Reset Time
• 10 to 999 sec by 1 sec.
❒ Default: 60 sec
175