Other Printing Problems - Ricoh C7528 Maintenance Manual

Troubleshooting

Other Printing Problems

Problem
Black areas and lines are print-
ed with an unnatural hue.
Color documents are printed in
black and white.
Fine dot pattern does not print.
Images are cut off, or excess
pages are printed.
Possible causes and solutions
• PCL 5c/PCL 6/PostScript 3
Select [CMY + K] for Gray Reproduction in the printer driv-
er's [Advanced] dialog box under the [Print Quality] tab.
• RPCS
Select [CMY + K] for Gray Reproduction under the [Image
Adjustments] tab in the printer driver's [Change User Set-
tings] dialog box.
The printer driver is not set up for color printing.
• PCL 5c/PCL 6/PostScript 3
Select [Color] for the Color/Black and White under the
printer driver's [Setup] tab.
• RPCS
Select [Color] for the Color/Black and White under the
printer driver's [Print Settings] tab.
For details, see the printer driver Help.
Some applications normally print color text as black and
white.
• PCL 5c/PCL 6/PostScript 3
Change the [Dithering:] setting in the [Advanced] dialog box
under the printer driver's [Print Quality] tab.
• RPCS
Change the [Dithering:] setting under the [Image Adjust-
ments] tab in the [Change User Settings] dialog box under
the [Print Quality] tab in the printer properties dialog box.
For details, see the printer driver Help.
You might be printing on paper that is smaller than the size
selected in the application. Use paper the same size as that
selected in the application. If you cannot load paper of the
correct size, use the reduction function to reduce the image,
and then print.
See the printer driver Help.
113