Ricoh C7528 Maintenance Manual page 15

Paper and Other Media
OHP transparencies
Printer setup
Printer driver setup
Enabled paper feeding tray Bypass tray
Number of sheets that can
be set
Both-sided printing
Additional cautions
Special Paper
Printer setup
Printer driver setup
Enabled paper feeding tray Any input tray can be used.
Both-sided printing
Additional cautions
Press [Paper Input] menu, [Paper Type], and then [Transparency] on
the control panel.
Click [Transparency] in the [Type:] list.
100
❒ Make sure paper is not stacked higher than the paper guides
inside the bypass tray.
Not possible
• Print speed for OHP transparencies is slower than for plain pa-
per.
• Paper settings can be set using the printer driver. Setting the
paper sizes using the display panel is not necessary when it is
set by the printer driver.
• Paper size settings set using the printer driver have priority
over those set using the machine's display panel.
• When the printer driver is not used, make settings using the
display panel.
• Select the [Maintenance] menu. Press [4C.Graphic Mode], [Text
Priority], and then print.
Make the following two settings using the control panel:
• Press [Paper Input] menu, [Paper Type], and then [Special Paper]
on the control panel.
• Press [Maintenance] menu, [Special Paper], and then [Special Pa-
per 1] - [Special Paper 4].
❒ From [Special Paper 1] to [Special Paper 4] in the menu, select
the paper type according to the paper you are loading.
Click [Special Paper] in the [Type:] list.
❒ Make sure paper is not stacked higher than the upper limit
mark (T) inside the tray. Make sure paper is not stacked higher
than the paper guides inside the bypass tray.
Possible
Print speed for special paper is slower than for plain paper.
15