Removing Punch-Hole Chips; Sr960 (2 Tray Finisher) - Ricoh C7528 Maintenance Manual

Troubleshooting

Removing Punch-hole Chips

When "Empty Punch Receptacle" appears on the display, the punch waste box
is full. Follow these steps to remove paper chips.
❒ The same message appears when the punch waste box is not installed cor-
rectly.
Empty Punch
Receptacle

SR960 (2 Tray Finisher)

A
Open the front cover of the 2 tray finisher.
The punch waste box is positioned in the location shown in the illustration.
B
Pull out the punch waste box, and then remove the paper chips.
C
Re-install the punch waste box.
D
Close the front cover of the 2 tray finisher.
134