Adjusting The Fuser For Thick Paper - Ricoh C7528 Maintenance Manual

Adjusting the Printer
Automatic color adjustment begins, and the following message appears.
Adjusting...
❒ To avoid malfunction, do not turn off the power while "Adjusting..." appears
on the display.
Automatic color adjustment takes about 50 seconds. A confirmation message
appears when complete.
Completed
Return to the color adjustment menu.
G
When you have made all settings, press the {Online} key.
The initial screen appears.

Adjusting the Fuser for Thick Paper

If color registration shifts when using thick paper
If color registration shifts when using thick paper, adjust the fuser for thick paper.
❒ Fuser adjustment for thick paper is not possible if the toner has almost run out.
Carry out this adjustment after changing the toner cartridge.
❒ Thick paper is needed to make the adjustment. Use the thick paper you nor-
mally use.
A
Load thick paper larger than A4 K in the bypass tray.
❒ For details about paper sizes the bypass tray can handle and paper loading
procedure, see p.6 "Paper and Other Media Supported by This Printer".
80