Extraordinary Maintenance - Smeg DUSF6300X Manual

4.9 Extraordinary maintenance

Live parts
Danger of electrocution
• Disconnect the oven power supply.
Replacing the internal light bulb
1. Completely remove all accessories from
inside the oven.
2. Remove the racks/trays support frames.
3. Remove the bulb cover using a tool (e.g.
a screwdriver).
4. Slide out and remove the lamp.
• Do not touch the halogen lamp
directly with your fingers, but
wrap it in insulating material.
• Pay attention not to scratch the
oven cavity enamel.
Cleaning and maintenance
5. Replace the lamp with one of the same
type (40W).
6. Refit the cover correctly, so that the
moulded part of the glass is facing the
door.
7. Press the cover completely down so that
it attaches perfectly to the bulb support.
Removing the seal
To permit thorough cleaning of the oven, the
door seal may be removed. There are
fasteners on all four sides to attach it to the
edge of the oven. Pull the 4 edges of the
seal outwards to detach the fasteners.
Removing the door seal
To remove the door seal:
1. Remove the internal glass pane.
2. Remove the fasteners of the door seal.
61