Smeg DUSF6300X Manual page 31

Table of Contents

Advertisement

Mounting under worktops (mm)
The oven is designed for mounting into any
piece of furniture as long as it is heat-
resistant. Respect the unit dimensions and
the oven overall dimensions for positioning.
Depending on the type of installation a slot
should be foreseen for ventilating the
appliance.
To be able to open the door
completely, any lower unit
protuberance should be at a
distance of at least 1 cm from the
oven.
Installation
When installed underneath a hob,
the panel must be at least 40 mm
thick. You should nevertheless refer
to the instructions in the hob
manual.
65

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dusf400s

Table of Contents