Smeg DUSF6300X Manual page 17

Setting the time
If the time is not set, the oven will
not switch on.
On the first use, or after a power failure, the
digits will be flashing on the
appliance's display.
1. Hold down the clock key
seconds. The dot between the hours and
the minutes flashes.
2. The time can be set via the value
increase key
key . Keep the key pressed in to
increase or decrease rapidly.
3. Wait 7 seconds. The dot between the
hours and the minutes stops flashing.
4. The symbol
that the appliance is ready to start
cooking.
To change the time, hold down the
value increase key
decrease key
for two seconds, then set the time.
for two
and value decrease
on the display indicates
and value
at the same time
Use
Timed cooking (only for the main oven)
Timed cooking is the function
which allows a cooking operation
to be started and then ended after
a specific length of time set by the
user.
1. Keep the clock key
symbol
2. Press the clock key
display the symbol
appear, alternating with the
current time.
3. Use the value increase
decrease
minutes of cooking.
4. Select a function and a cooking
temperature.
5. Wait approx. 5 seconds without pressing
any key in order for the function to
activate. The current time and the
symbols
display.
At the end of cooking the heating elements
will be deactivated. On the display, the
symbol turns off, the symbol
flashes and the buzzer sounds.
6. To turn the buzzer off, simply press one of
the programmer clock keys.
pressed until the
appears.
again. On the
and the text
and value
keys to set the required
and will appear on the
51