Gestetner DSc545 Printer Reference page 39

G
Click [Next >].
H
Select the machine model you want to use.
The printer name can be changed in the [Change settings for 'Printer Name'] box.
I
Double-click the printer name to display the printer settings.
The details shown in [Comment:], [Driver:], and [Port:] vary depending on the
operating system, printer model, and port.
J
Click [Port:], and then click [Add].
K
Click [Standard TCP/IP Port], and then click [OK].
Configure the Standard TCP/IP port settings, and then see Windows Help if
[Standard TCP/IP Port] does not appear.
L
Click [Next >] in the [Add Standard TCP/IP Printer Port Wizard] dialog box.
M
Enter the printer name or IP address in the [Printer Name or IP Address] box.
The [Port Name] text box automatically obtains a port name. Change this name
if necessary.
When the device selection appears, select "RICOH NetworkPrinter Driver C
Model".
N
Click [Next >].
O
Click [Finish] in the [Add Standard TCP/IP Printer Port Wizard] dialog box.
The installation start dialog box reappears.
P
Check that the port of the selected printer is displayed in [Port:].
Q
Configure the default printer as necessary.
R
Click [Continue].
The printer driver installation starts.
S
After the installation is completed, select one of the options to restart the
computer either now or later, and then click [Finish].
Restart the computer to complete installation.
Note
❒ To stop installation of the selected software, click [Cancel] before installa-
tion is complete.
❒ Auto Run may not work with certain operating system settings. In that
case, launch "Setup.exe" on the CD-ROM root directory.
Installing the Printer Driver
1
31