(3) How to adjust contrast
The contrast (brightness) of the display can be adjusted. It is factory-adjusted to "0."
・Press Button Ⓓ to show the Time/Calendar mode.
① Press and hold Button Ⓑ to activate the Time/Calendar Setting function. The
3
home time city currently selected appears in the top row.
② Press Button Ⓓ repeatedly to show the contrast adjustment display (CONT).
③ Press Button Ⓐ or Ⓒ to adjust the contrast.
Ⓒ
−2 −1 0 1 2
Low Contrast High
④ After the contrast adjustment is completed, press Button Ⓑ to return to the
Time/Calendar display. If the watch is left untouched with the digit flashing, the
display automatically returns to the Time/Calendar in 2 to 3 minutes.
86
(5) How to adjust sensitivity to tap input
When the watch is worn on the wrist, the backlight lights up for two seconds by lightly tapping
the watch face once. The sensitivity to tap input can be adjusted. It is factory-adjusted to "0."
・Press Button Ⓓ to show the Time/Calendar mode.
① Press and hold Button Ⓑ to activate the Time/Calendar Setting function. The home time
3
city currently selected appears in the top row.
② Press Button Ⓓ repeatedly to show the display for adjusting the sensitivity to tap input (TAP).
③ Press Button Ⓐ or Ⓒ to adjust the sensitivity.
※ I f the backlight will not light up easily by lightly tapping the watch face, set the sensitivity
to tap input to "1."
Ⓒ
−1 0 1
Ⓐ
Sensitivity
Low
High
to tap input
④ After the adjustment of the sensitivity to tap input is completed, press Button Ⓑ to return
to the Time/Calendar display. If the watch is left untouched with the digits flashing, the
display automatically returns to the Time/Calendar in 2 to 3 minutes.
88
Contrast level: 0
Ⓒ
Ⓑ
Ⓐ
Ⓐ
Ⓓ
Sensitivity to tap input: 0
Ⓒ
Ⓑ
Ⓐ
Ⓓ
(4) How to set Power Save function
The time before the Power Save function is activated can be set. It is factory-adjusted to
30 minutes (0.5H).
・Press Button Ⓓ to show the Time/Calendar mode.
① Press and hold Button Ⓑ to activate the Time/Calendar Setting function. The home time
city currently selected appears in the top row.
② Press Button Ⓓ repeatedly to show the Power Save setting display (P-SAVE).
③ Press Button Ⓐ or Ⓒ to select the time before Power Save function is activated or turn it "OFF."
Ⓒ
OFF 0.5H 1.0H 2.0H 4.0H
1 hour is set for
Power Save function
Ⓒ
Ⓑ
Ⓐ
Ⓓ
※If the watch is left untouched without being exposed to light and any button operation for a preset time or
longer, the Power Save function turns off the display to reduce energy consumption. To deactivate the Power
Save function and return to the pervious display, expose the watch to light or press any of the buttons.
④ After the Power Save setting is completed, press Button Ⓑ to return to the Time/Calendar
display. If the watch is left untouched with the digits flashing, the display automatically
returns to the Time/Calendar in 2 to 3 minutes.
(6) How to use dual time display
The Time/Calendar mode shows a dual time display that indicates both the
home time and world time on the same display.
The world time city can be selected from 44 cities in the world, and DST can be
set for each of them.
※When GMT is selected as the world time city, DST setting cannot be made.
1)Changeover of display positions of home time and world time
With each press of Button Ⓑ, the display positions of the home time and world time
are changed over between the middle and bottom rows.
※The world time mark "
" is shown in the row where the world time is displayed.
Day of the week
Date
Ⓑ
World time mark
Middle row: Home time
Bottom row: World time
Ⓐ
Power Save function is turned off
Ⓒ
Ⓑ
Ⓓ
Ⓐ
World time city
Time difference
Ⓑ
Ⓑ
World time mark
Middle row: World time
Bottom row: Home time
3
87
3
89