Table of Contents
Advertisement
(3) Engagement/disengagement of alarm
・ W ith each press of Button Ⓐ in the Alarm display, the alarm is engaged ("on")
and disengaged ("- -") alternately.
※ T he alarm mark "
" is shown if the alarm is engaged in any of the three channels.
※ T he alarm mark "
" is shown in any mode except when the power save, sleep or
setting function is activated.
（Alarm will ring）
Alarm engaged
7
Ⓐ
Alarm mark is shown
(4) How to stop alarm sound
・The alarm rings at the designated time for 10 seconds.
To stop it manually, press any of the buttons.
※The alarm sound can be stopped when any mode is shown on the display.
106
(2) Explanation of display
After
1 minute
Amount of
Generation
power reserve
level
(3) To resume generation level display
・When "- - - -" is shown in the middle
row, press Button Ⓐ. The present
generation level is indicated for 1
minute.
8
(4) Guidelines of charging
・When the generation level is "06" or higher, the watch is charged satisfactorily. The
top end dot of the dots indicating the amount of power reserve flashes to indicate that
charging is progressing (see "(1) How to charge" on P. 75).
・When the number of dots indicating the amount of power reserve has reduced to two,
charge the watch immediately. The power reserve is depleting, and the battery mark on
the display panel is flashing (see "(3) Display and amount of power reserve" on P. 77).
108
（Alarm will not ring）
Alarm disengaged
Ⓐ
Ⓐ
Alarm mark is not shown
Generation level:
It is indicated in 11 levels (00 to 10) by the value in the
middle row as well as by the number of dots on the dial's edge
from 5 to 1 o'clock positions. "1" in the middle row corresponds
to two dots on the dial's edge. The indication is updated every
second for 1 minute, and ceases to be displayed thereafter.
Amount of power reserve:
It is indicated in 11 levels (0 to 100%) by the number of dots on the
dial's edge from 7 to 11 o'clock positions. It is updated every minute.
Ⓐ
Ⓐ
Amount of
Amount of
Generation
power reserve
power reserve
level
How to Use Solar Monitor Mode
The present generation level of the solar panel and the amount of power reserve
are detected and displayed in 11 levels respectively. They provide the guidelines
for performing charging. The generation level is indicated numerically in the
middle row as well as by the number of dots shown on the right side of the dial's
edge. The amount of power reserve is indicated by the number of dots shown on
the left side of the dial's edge.
(1) Buttons and functions
・ Press Button Ⓓ to show the Solar Monitor mode. After "SOLAR" appears in
the top row and the dots on both sides of the dial's edge flash, "SOLAR" and
"LEVEL" are shown alternately in the top row, and the generation level and the
current time are shown in the middle and bottom rows, respectively.
Button Ⓒ
Button Ⓑ
Button Ⓐ
Button Ⓓ
Daily Care
● The watch requires good daily care
・Wipe away moisture, sweat or dirt with a soft cloth
・ A fter soaking the watch in seawater, be sure to wash the watch in clean
pure water and wipe it dry carefully.
※ I f your watch is rated as "Non-water resistant" or "water resistant for
everyday life," do not wash the watch. Do not pour running water directly
from faucet onto the watch. Put some water into a bowl first, and them soak
the watch in the water to wash it.
Performance and type → P. 112.
Water resistance → P. 110.
Button Ⓐ：To resume generation level
display
Button Ⓑ：Disabled
Button Ⓒ：Disabled
Button Ⓓ：To show Time/Calendar mode
8
107
9
109
Advertisement
Table of Contents
