BenQ W1700 User Manual page 31

Direct Power Allows the projector to turn on automatically once the power is fed through the
power cord.
On
• Menu Position: Sets the On-Screen Display (OSD) menu position.
• Menu Display Time: Sets the length of time the OSD will remain active after
Menu Settings
your last key press.
• Reminder Message: Sets the reminder messages on or off.
Renames the current input source to your desired name.
Source
On the Source Rename page, use / / / , and OK to set the desired
characters for the connected source item.
Rename
When done, press BACK to save the changes and exit.
Auto Source Allows the projector to automatically search for a signal.
• Sound Mode
Sound
• Mute: Temporarily turns off the sound.
• Volume: Adjusts the sound level.
• Power On/Off Ring Tone: Turns on or off the ring tone when the projector is
in startup and shutdown process.
The only way to change Power On/Off Ring Tone is setting On or Off here. Setting the sound
mute or changing the sound level will not affect the Power On/Off Ring Tone.
• Reset Audio Settings: All of the adjustments you've done for the Sound menu
return to the factory preset values.
• Effect Mode: This function utilizes MaxxAudio sound enhancement
technology, which incorporates Waves's algorithms to deliver great effects of
the bass and treble, and provide you with immersive cinematic audio
experience. The following preset sound modes are provided: Standard,
Cinema, Music, Game, Sport and User.
The User mode allows you to personalize the sound settings. When selecting
the User mode, you may make manual adjustments with the User EQ
function.
If the Mute function is activated, adjusting Sound Mode will turn off the
Mute function.
• User EQ: Select desired frequency bands (100 Hz, 300 Hz,1k Hz, 3k Hz, and
10k Hz) to adjust the levels according to your preference. The settings made
here define the User mode.
Menu operation 31