BenQ W1700 User Manual page 26

• HDR Brightness
The projector can automatically adjust the brightness levels of your image according
to the input source. You can also manually select a brightness level to display better
picture quality. When the value is higher, the image becomes brighter; when the
value is lower, the image becomes darker.
• Color Temperature
There are several preset color temperature settings available. The available settings
may vary according to the signal type selected.
You can also set a preferred color temperature by adjusting the following options.
• Color Management
The Color Management provides six sets (RGBCMY) of colors to be adjusted.
Advanced
When you select each color, you can independently adjust its range and saturation
(Continued)
according to your preference.
Saturation is the amount of that color in a video picture. Lower settings produce less saturated
colors; a setting of "0" removes that color from the image entirely. If the saturation is too high, that
color will be overpowering and unrealistic.
26 Menu operation
• Normal: Maintains normal colorings for white.
• Cool: Makes images appear bluish white.
• Lamp Native: With the lamp's original color temperature and higher
brightness. This setting is suitable for environments where high brightness is
required, such as projecting pictures in well lit rooms.
• Warm: Makes images appear reddish white.
• R Gain/G Gain/B Gain: Adjusts the contrast levels of Red, Green, and Blue.
• R Offset/G Offset/B Offset: Adjusts the brightness levels of Red, Green,
and Blue.
• Primary Color: Selects a color from among Red, Yellow, Green, Cyan, Blue,
or Magenta.
• Hue: Increase in the range will include colors
consisted of more proportions of its two
adjacent colors. Please refer to the illustration
for how the colors relate to each other.
For example, if you select Red and set its range
at 0, only pure red in the projected picture will
be selected. Increasing its range will include red
close to yellow and red close to magenta.
• Saturation: Adjusts the values to your
preference. Every adjustment made will reflect to
the image immediately. For example, if you select Red and set its value at 0,
only the saturation of pure red will be affected.
• Gain: Adjusts the values to your preference. The contrast level of the
primary color you select will be affected. Every adjustment made will reflect to
the image immediately.
Yellow
GREEN
RED
Cyan
Magenta
BLUE