Table of Contents
Advertisement
• 3D Sync Invert
When your 3D image is distorted, enable this function to switch between the image
for the left eye and the right eye for more comfortable 3D viewing experience.
3D
(Continued)
• 3D Switch Reminder
Displays a message during the projector start-up to remind that it is necessary to
turn on the 3D function if you want to enjoy 3D contents.
The projector supports HDR imaging sources. It can automatically detect the
dynamic range of the source, and optimize settings to reproduce contents under
HDR
wider dynamic range. Meanwhile, the Picture Mode cannot be adjusted after
switching to HDR. If the input source is not defined with dynamic range, you can
also manually select HDR or SDR for it.
When this function is enabled:
Silence
INSTALLATION menu
Projector
The projector can be installed on a ceiling or behind a screen, or with one or more
mirrors. See
Position
Adjusts the image size and focus and check that the
projected image is free from distortion.
Test Pattern
• The acoustic noise will be minimized.
• The display resolution will be set at 1920 x 1080.
• The PICTURE > Picture Mode menu will be automatically changed to
Silence and grayed out.
Choosing a location on page
11.
Menu operation
29
Advertisement
Table of Contents
