System Setup : Basic Menu - BenQ LU9245W User Manual

HDBaseT EDID
•
Press ◄/► to switch HDBaseT EDID between HDMI 1.4 or HDMI 2.0 in order to solve
compatibility issue with uncertain old players.
Enhance: Enhanced mode can switch to HDMI 2.0 EDID.
•
• Standard: Standard mode can switch to HDMI 1.4 EDID.
• HDMI Equalizer
Press ENTER to enter the HDMI Equalizer menu. Press ▲/▼ and press ENTER to select
the HDMI. Press ◄/► to set to the default value.
• Auto Sync
Press ◄/► to enable or disable auto sync function.

System Setup : Basic menu

• Language
Press ENTER to enter the Language menu. Press ▲/▼/◄/► to select the language of OSD
menu.
Projector Installation
•
Press ◄/► to select the projector installation. The options are Front Table, Rear Table, Rear
Celling and Front Ceiling.
• Menu Settings
Press ENTER to enter the Menu Settings menu. See
for more details.
Operation Settings
•
Press ENTER to enter the Operation Settings menu. See
page 51 for more details.
• Remote Receiver
Press ◄/► to select the remote receiver. The options are Front, Rear and Front+Rear.
Panel Key Lock
•
Press ◄/► to enable or disable all panel key functions except POWER on the projector.
50
"Menu Settings menu" on page 51
"Operation Settings menu" on