Table of Contents
Advertisement
TD-W8968
1.3 Panel Layout
1.3.1 The Front Panel
The modem router's LEDs are located on the front panel (View from left to right).
LED Explanation:
Name
(Power)
(ADSL)
(Internet)
(WLAN)
Slow Flash
(WPS)
(USB)
300Mbps Wireless N USB ADSL2+ Modem Router User Guide
Figure 1-1
Status
On
The modem router is powered on.
The modem router is off. Please ensure that the power adapter is
Off
connected correctly.
On
ADSL line is synchronized and ready to use.
Flash
The ADSL negotiation is in progress.
ADSL synchronization fails. Please refer to
Off
troubleshooting.
On
The network is available with a successful Internet connection.
Flash
There is data being transmitted or received via the Internet.
There is no successful Internet connection or the modem router
Off
is operating in Bridge mode. Please refer to
troubleshooting.
On
Wireless is enabled but no data is being transmitted.
The modem router is sending or receiving data over the wireless
Flash
network.
Off
Wireless is disabled.
A wireless device has been successfully added to the network by
On
WPS function.
WPS handshaking is in process and will continue for about 2
minutes. Please press the WPS button on other wireless devices
that you want to add to the network while the LED is flashing.
A wireless device has failed to be added to the network by WPS
Quick
function. Please refer to 4.6.2.1 WPS Setup for more
Flash
information.
On
A storage device or printer has connected to the USB port.
Indication
4
Note 1
for
Note 2
for
Advertisement
Table of Contents
