Station List - TP-Link TDW8968V3 User Manual

TD-W8968
You can enable or disable Guest Network. When you enable this function, you could set wireless
parameters for Guest Network.
Guest SSID: The guest network name. When setting up a Guest network, it is strongly
recommended to use a name that easily distinguishes it from your primary network.
Authentication Type: Select the Authentication Type from the drop-down list.
Encryption: You can select either AES or AES+TKIP.
Wireless Password: Here display the default wireless password, you can click Click here to
display to see the default wireless password, and you can also enter ASCII characters
between 8 and 63 characters or 8 to 64 Hexadecimal characters to create a new password.
Group Key Update Period: Specify the group key update interval in seconds. The value
should be 30 or above. Enter 0 to disable the update.
Allow Guest to Access my Local Network: The guests have access to your Local Network,
but can not login the modem router's web management interface.
Allow Guest to Access my USB Storage: The guests can access the specified files on the
USB storage device via the function of USB Storage Sharing, but the function of
FTP Server, Media Server and Print Server are not available in Guest Network. For more
details please refer to
Guest Network Isolation: This function can isolate wireless clients on your guest network
from each other. Client isolation is disabled by default.
Guest Network Bandwidth Control: With this function, you can configure the Upstream
Bandwidth and Downstream Bandwidth for guest network.
Click Save/Apply to save your settings.

4.8.2 Station list

Choose menu "Guest Network" "Station list", you can see the MAC Address, Associated,
Authorized, SSID and Interface.
300Mbps Wireless N USB ADSL2+ Modem Router User Guide
Figure 4-103
4.8.3 Storage Sharing.
83