Panel Layout; The Front Panel - TP-Link TW-MR3220 User Manual

1T2R MIMO, CCA technologies deliver greater coverage and higher speed

Wireless security encryption easily at a push of "WPS" button

WDS wireless bridge provides seamless bridging to expand your wireless network

Backward compatible with 802.11b and 802.11g devices

Provides WPA/WPA2-Enterprise, WPA/WPA2-Personal authentication, TKIP/AES

encryption security
Supports 3G/4G/Dynamic IP/Static IP/PPPoE/L2TP/PPTP Internet access

Supports Virtual Server, Special Application and DMZ host

Supports UPnP, Dynamic DNS, Static Routing

Provides Automatic-connection and Scheduled Connection on certain time to the Internet

Built-in NAT and DHCP server supporting static IP address distributing

Connects Internet on demand and disconnects from the Internet when idle for PPPoE

Provides 64/128/152-bit WEP encryption security and wireless LAN ACL (Access Control

List)
Supports Flow Statistics

Supports firmware upgrade and Web management


1.4 Panel Layout

1.4.1

The Front Panel

The Router's LEDs are located on the front panel (View from left to right).
Item Status
(PWR)
(SYS)
Flashing
Flashing
(WLAN)
（WAN）
Flashing
（LAN1-4）
（USB）
Flashing
Slow
Flash
（WPS）
TL-MR3220
On Power is on.
Off Power is off.
The Router is initializing.
On
The Router is working properly.
Off The Router has a system error.
The Wireless function is enabled.
Off The Wireless function is disabled.
A device is linked to the corresponding port but there is no
On
activity.
An active device is linked to the corresponding port.
Off No device is linked to the corresponding port.
The USB 3G/4G modem is connected but no data being
On
transferred.
Data is received or sent through the 3G/4G modem.
Off The USB 3G/4G modem is not connected.
A wireless device is connecting to the network by WPS
function. This process will last in the first 2 minutes.
A wireless device has been successfully added to the network
On
by WPS function.
3G/4G Wireless N Router User Guide
Indication
-2-