Epson WorkForce AL-C500 Series User Manual page 91

AL-C500 Series User's Guide
Remove the staple cartridge and check to see if there is any problem with it. If there are only a few
staples left, replace the staple cartridge with a new one.
For details, see "Problems Using Stapler/Stacker Unit" on page 122.
Can't Print
The print data is deleted because it is incorrect.
Make sure the appropriate paper size and printer driver are used.
Can't Print Duplex
The printer has encountered problems during duplex printing. Make sure you are using an
appropriate type and size of paper for the duplex printing. The problem could also be a result of
incorrect settings for the paper source you are using. Pressing the Start/Stop button will print the rest
of the print job on only one side of the paper. Press the W Pause/Cancel button to cancel the print
job.
Can't Use Bookmark
The registered menu cannot be used because the menu is disabled by changing any settings after
registered the menu in bookmark.
Cassette Error yyy
Too many optional paper cassette units are installed to the printer. Up to three units can be installed.
CF CHECK
The printer is checking the CompactFlash memory.
Check Paper Size
The paper size setting is different from the size of paper loaded in the printer. Check to see if the correct
size of paper is loaded in the specified paper source.
To clear this error, select Clear Warning from the control panel's Reset Menu. See "How to access
the control panel menus" on page 60 for instructions.
Check Paper Type
Using the Control Panel 91