Epson WorkForce AL-C500 Series User Manual page 95

!
Caution:
If the printer has been in use, the fuser and the surrounding areas may be very hot. If you must
touch one of these areas, turn off the printer and wait 30 minutes to allow the heat to subside before
doing so.
Image Optimum
There is insufficient memory to print the page at the specified print quality. The printer automatically
lowers the print quality so that it can continue printing. If the quality of the printout is not acceptable,
try simplifying the page by limiting the number of graphics or reducing the number and size of fonts.
To clear this error, select Clear Warning from the control panel's Reset Menu. See "How to access
the control panel menus" on page 60 for instructions.
You may need to increase the amount of printer memory to be able to print at the desired print quality
for your document. For more information on adding memory, see "Memory Module" on
page 136.
Install Cassette1
The lower paper cassette is not installed. Install the cassette.
Install Fuser
The fuser unit is not installed correctly. Open cover B and install it correctly.
For details about replacement, see the instructions that come with the fuser unit.
!
Caution:
If the printer has been in use, the fuser and the surrounding areas may be very hot. If you must
touch one of these areas, turn off the printer and wait 30 minutes to allow the heat to subside before
doing so.
Install Photocon uuuu
The wrong photoconductor unit is installed in the indicated color position in the printer or the
position is empty. (The letters C, M, Y, or K appear in place of uuuu and indicate the colors Cyan,
Magenta, Yellow, and Black respectively.)
Install the indicated cartridges. See "Replacing Consumable Products/Maintenance Parts" on
page 146.
Install Transfer Unit
AL-C500 Series User's Guide
Using the Control Panel 95