Using The Printer - Epson WorkForce AL-C500 Series User Manual

Using the printer

❏ Be careful not to touch the fuser, which is marked ! (CAUTION), or the surrounding areas. If the
printer has been in use, the fuser and the surrounding areas may be very hot. If you must touch one
of these areas, turn off the printer and wait 30 minutes to allow the heat to subside before doing
so.
*! (CAUTION)
❏ Be careful not to touch the parts, which are marked ! (CAUTION) as shown in the illustration
below. If the printer has been in use, those parts may be very hot.
Heatsink
*! (CAUTION)
AL-C500 Series User's Guide
Safety Instructions 17