Table of Contents
Advertisement
22. Close cover M.
23. Connect the power cord of the stapler/stacker unit to the power supply socket on the printer.
24. Reconnect the interface cable and power cord and turn the printer on.
To confirm that the option is installed correctly, print a configuration status sheet. See "Printing a
Configuration Status Sheet" on page 106.
Note for Windows users:
If EPSON Status Monitor is not installed, you have to make settings manually in the printer driver.
Removing the stapler/stacker unit
Perform the installation procedure in reverse.
AL-C500 Series
Using Optional Stapler/Stacker Unit
User's Guide
120
Advertisement
Table of Contents
