Network Menu; Aux Menu; Pcl Menu - Epson WorkForce AL-C500 Series User Manual

USB I/F
Allows you to activate or deactivate the USB interface.
USB Speed
Allows you to select the operation mode of USB interface. Selecting HS is recommended. Select FS if HS
does not work on your computer system.
Buffer Size
Determines the amount of memory to be used for receiving data and printing data. If Maximum is
selected, more memory is allocated for receiving data. If Minimum is selected, more memory is
allocated for printing data.
Note:
❏ To activate Buffer Size settings, you must turn off the printer for more than five seconds then turn
it back on. Or, you can perform a Reset All operation, as explained in "Reset Menu" on
page 73.
❏ Resetting the printer erases all print jobs. Make sure the Ready light is not flashing when you reset the
printer.

Network Menu

See the Network Guide for each setting.

AUX Menu

See the Network Guide for each setting.

PCL Menu

These settings are available in the PCL mode.
Item
FontSource
Font Number
Settings (default in bold)
*1
Resident, Download
0... 65535 (depending on your settings)
AL-C500 Series User's Guide
Using the Control Panel 77