Furuno SC-60 Operator's Manual page 81

7. Orient the antenna unit as shown in the illustration below.
PORT
Antenna
Element
3
7. Fasten the Antenna Cover S with three screws.
8. Follow the instructions in the paragraph 2.6 Initial Settings. If the installation
site is suitable weld the antenna unit to the antenna mast as shown in the
next paragraph.
BOW
Antenna
Element
2
Antenna
Element
1
Orienting the antenna unit
NOTICE
The antenna unit should be positioned
within ± 2.5
of the bow.
°
Antenna Cover S
3
Antenna unit SC-603
A number is inscribed
on each antenna arm.
This is the antenna
element number.
The bow mark is between
antenna element [1] and [2].
Face the bow mark towards
the bow
2
1
APPENDIX B
B-3