Flush Mount - Furuno SC-60 Operator's Manual

2.4.2

Flush mount

Two types of flush mounts are available. See the outline drawing at the back of
the manual for details.
Flush mount "F"
Flush mount "F" kit
Cosmetic Panel
Tapping Screw
Hex Bolt
Spring Washer
1. Make a cutout in the mounting location. The dimensions are 183(W) x 92(H)
mm.
2. Fasten the cosmetic panel to the display unit with hex bolts and flat washers.
3. Fasten the display unit to the mounting location with tapping screws.
Flush mount "S"
Flush mount "S" kit
Flush Mount Fixture
Wing Bolt
Wing Nut
Hex Bolt
Spring Washer
1. Make a cutout in the mounting location. The dimensions are 167(W) x 92(H)
mm.
2. Place the display unit in the cutout.
3. Fix the display unit to the two flush mount fixtures with hex bolts and spring
washers.
4. Screw the butterfly nut on the butterfly bolt.
5. Fix the display unit with the butterfly bolt and then tighten the butterfly nut.
Type: OP20-29, Code No: 000-041-405)
Name
20-016-1051
5X20
M6X12
M6
Type: OP20-17, Code No.: 000-040-720)
Name Type
20-007-2401
M4X30
M4
M6X12
M6
Type Code No.
100-251-370
000-802-840
000-862-127
000-864-260
Code No.
100-183-190
000-804-799
000-863-306
000-862-127
000-864-260
Flush mount "S"
2. INSTALLATION
Qty
1
4
2
2
Qty
2
4
4
2
2
2-15