Trip Menu; Resetting Distance Run - Furuno SC-60 Operator's Manual

3.12

TRIP Menu

The TRIP menu chooses the indication to show on the Speed display, distance
source; resets distance run (see para. 3.13) and smooths the tide drift indication.
1. Press the [MENU] key to display the main menu.
2. Choose TRIP MENU and press the [ENT] key.
1. Choose DISTANCE DISP and press the [ENT] key.
2. Choose what to display on the Speed display; distance run (DSTNC) or tide
direction and speed (DRIFT). Press the [ENT] key.
3. Choose DISTANCE CALC and press the [ENT] key.
4. Choose the source for distance run; GPS, VLW (distance traveled through
water) or VBW (Dual ground/water speed). (VLW requires DS-80 type
Doppler speed log and VBW requires Current indicator or Doppler speed
log.) Press the [ENT] key.
5. Choose DRIFT AVG. and press the [ENT] key.
6. If tide current and speed data is unstable, enter a smoothing figure to
stabilize the data. The higher the figure the more smoothed the data. A
setting between 0 (no smoothing) and 9999 is available.
7. Press the [ENT] key.
8. Press the [DISP] key to close the menu.
3.13

Resetting Distance Run

The distance run may be reset to zero as below when the source of distance run
is GPS or VBW.
1. Press the [MENU] key to display the main menu.
2. Choose TRIP MENU and press the [ENT] key.
3. Choose RESET DISTANCE and press the [ENT] key.
4. Choose YES and press the [ENT] key.
5. Press the [DISP] key to close the menu.
TRIP MENU
DISTANCE DISP : DSTNC
DISTANCE CALC: GPS
RESET DISTANCE?
DRIFT AVG : 10SEC
TRIP menu
RESET DISTANCE?
ARE YOU SURE?
YES NO
RESET DISTANCE prompt
3. OPERATION
3-19