Parts Location - Furuno SC-60 Operator's Manual

Satellite compass
Table of Contents

Advertisement

Connector
Port Label
LOG/ALARM
MJ7
HDG IN
MJ6
Note: Each GPS receiver GPS1, GPS2, and GPS3 calculates VTG/GGA/GLL/ZDA. The
output from HDG OUT and NAV OUT ports is one calculated by the GPS1. However,
when the GPS1 is defective, the GPS2 replaces it. When both GPS1 and GPS2 are
defective, the data calculated by the GPS3 is used.

Parts Location

Angular Rate
Sensor Assy.
SC-303
GPS Receiver
Assy. (GPS
Receiver Module)
20-513-131
(GN-77NA-NF)
I/O
Signal
Type
O
Log
signal
HDG
alarm
I
Heading Heading data in either AD10 or IEC 61162 (NMEA
Processor unit, cover removed
200 pulse/nm or 400 pulse/nm (software), 0.5 A max.
Heading alarm, 0.5 A max, normal close
0183) format (4800 bps) is automatically received.
Priority of IEC 61162 (NMEA 0183) sentence is
HDT>HDG>HDM.
The signal is selected through the menu during the
period of internal heading sensor failure.
VBW/VHW/VLM may be input from a current indicator.
MAIN Board (processor)
20P8171A
APPENDIX A
Remarks
PWR Board
20P8164
Fuse
FIL Board
20P8165
A-11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents