Section 3 - Detailed Component Description - Electro-Voice REV Operating Instructions Manual

Section 3 - Detailed Component Descriptions
REV-S or REV-D Receiver
REV Receiver Controls, Connectors, and Indicators
1. Power ON/OFF
2. 1/4" headphone jack with adjustable volume
(channel selection on REV-D)
3. Graphical Display
a. Channel Display
b. Battery Strength Indicator
c. Diversity Indicator
d. RF Strength of Signal Indicator
e. Audio Level Indicator
4. Display Control Buttons (Menu/Set/Up/Down)
Figure 1
Front Panel
Figure 2
Back Panel
5. IEC Power Cord Connector
6. XLR Balanced Audio Output Connector (two on REV-D)
7. Unbalanced 1/4" Line Level Audio Output Connector
(two on REV-D)
8. TNC Antenna Input Connectors
9. REV-D TNC Antenna Output connectors
10. CAN Bus RJ45 connectors (two in parallel)
-3-
ENGLISH