Sound Check Screen; Copy Group - Electro-Voice REV Operating Instructions Manual

Sound Check Screen:

Display:
1. Battery Status
2. Peak Audio level held while screen is displayed
3. Range of RF Signal Strength
4. Count Tone on or off indicator
5. Squelch Break Counter
Controls
1. [MENU] goes to next screen
2. [SET] clears screen display variables and restarts Sound
Check
3. [UP] turns on the Count Beep (
the beep off ( ).
4. Press and hold [SET] shows Antenna Test

Copy Group

Selecting the Copy Group will copy the currently selected group
to the first unused User Group.
Press [SET] to accept the group and places the unit into the
Frequency Edit Screen (User Defined groups only) for editing.
Press [UP/DOWN] to select a different user group.
Press [MENU] to return radio to its previous state.
), [DOWN] turns
-22-
Figure 27
Sound Check Screen
Figure 28
Sound Check Screen
Antenna Test Screen
Figure 29
Copy Group Screen
Figure 30
Copy Group Edit Screen
ENGLISH