Table of Contents
Advertisement
2.2 Motherboard Installation
All motherboards have standard mounting holes to fit different types of chassis. Make sure
that the locations of all the mounting holes for both the motherboard and the chassis match.
Although a chassis may have both plastic and metal mounting fasteners, metal ones are
highly recommended because they ground the motherboard to the chassis. Make sure that
the metal standoffs click in or are screwed in tightly.
Phillips Screwdriver (1)
Tools Needed
JGPW4
Location of Mounting Holes
Notes: 1. To avoid damaging the motherboard and its components, please do not use
a force greater than 8 lb/inch on each mounting screw during motherboard installation.
2. Some components are very close to the mounting holes. Please take precautionary
measures to avoid damaging these components when installing the motherboard to
the chassis.
Phillips Screws (14)
VGA
COM
JLAN1
JLAN2
LEDM1
USB2/3 (3.0)
LAN2
LAN1
LAN
CTRL
LED6
BT1
JPQAT2
JPQAT1
PCH
BIOS
LICENSE
BAR CODE
CN6
IPMI CODE
MAC CODE
SAN MAC
CPU1
JGPW3
FAN5
23
Chapter 2: Installation
Standoffs (14)
Only if Needed
IPMI_LAN
JTPM1
JUSBA1
PSU2
X11DSF-E
REV:1.01
CPU2
FAN4 FAN3
FAN2 FAN1
CPU2
PSU1
JGPW1
JGPW2
Advertisement
Table of Contents
