Table of Contents
Advertisement
Commit Changes and Exit
Select this feature to keep the changes you have made and exit from the system.
Discard Changes and Exit
Select this feature to discard the changes you have made and exit from the system.
Delete Certification
If this feature is set to Enable, the certificate enrolled in the system will be deleted. The
options are Enable and Disable.
RAM Disk Configuration
This feature allows the user to configure the settings for the RAM disks installed in the system.
When you select this submenu and press <Enter>, the following items will display:
•
Disk Memory Type: This feature specifies the type of memory that is available for you to
create a RAM disk. The options are Boot Service Data and Reserved.
Create Raw
This feature allows the user to create a raw RAM disk from all available memory modules in
the system. When you select this submenu and press <Enter>, the following items will display:
•
Size (Hex): Use this feature to set the size of the raw RAM disk. The default setting is 1.
•
Create & Exit: Select this feature when you want to exit from this submenu after you've
created a raw RAM disk.
•
Discard & Exit: Select this feature when you want to abandon the changes you've made
and to exit from the submenu.
Create from File
This feature allows the user to create a RAM disk from a file specified by the user. Select
this submenu and press <Enter>, the following items will display:
•
Create RAM Disk List: Use this feature to create a RAM disk list.
•
Remove Selected RAM Disk(s): Use this feature to delete the RAM disk(s) specified by
the user.
105
Chapter 4: UEFI BIOS
Advertisement
Table of Contents
