Table of Contents
Advertisement
•
SATA 3.0
Peripheral Devices
•
Two (2) USB 3.0 ports on the rear I/O panel (USB 3/4)
•
One (1) internal USB 2.0 header with (2) USB connections for front access (USB0/1)
•
One (1) internal USB header supports two USB 3.0 connections (USB5/USB6)
BIOS
•
256 Mb SPI AMI BIOS
®
•
ACPI 3.0 or later, PCI F/W 3.0, SMBIOS 2.7 or later
Power Management
•
ACPI power management (S4, S5)
•
Power-on mode for AC power recovery
•
Power button override mechanism
System Health Monitoring
•
Onboard voltage monitoring for +1.8V, +3.3V, +5V, +/-12V, +3.3V Stdby, +12V Stdby, HT, Memory, PCH Temp, System
Temp, Memory Temp
•
5 CPU (# of switching-phase voltage regulator)
•
CPU/system overheat LED and control
•
CPU Thermal Trip support
•
PECI / TSI
•
CPU Thermal Design Power (TDP) support of up to 205W
Fan Control
•
Eight 4-pin fan headers
•
Fan speed control
System Management
•
Trusted Platform Module (TPM) support
•
Watch Dog / Non-maskable interrupt
•
RoHS
•
BMC SD Card Slot
•
Chassis intrusion header and detection
the chassis to receive an alert via IPMI.)
LED Indicators
•
CPU/Overheating
•
Power/Suspend-state indicator
•
Fan Failure
•
UID/Remote UID
•
HDD Activity
•
LAN Activity
Dimensions
•
15.59" (L) x 16.73" (W) (395.98 mm x 424.94 mm)
Motherboard Features
•
Total of 10 SATA 3 ports:
•
Eight (8) SATA 3.0 (JS1)
•
Two (2) SATA 3.0 SuperDOM connectors (S-SATA0, S-SATA1)
SM Flash UEFI BIOS
(JL1)
(Note: Please connect a cable from the Chassis Intrusion header at JL1 to
15
Chapter 1: Introduction
Advertisement
Table of Contents
