Table of Contents
Advertisement
Super X11DSF-E User's Manual
Motherboard Features
CPU
•
This motherboard supports dual Intel Xeon Scalable-SP and 2nd Generation Intel® Xeon Scalable-SP processors which
offer 3 Intel® UltraPath Interconnect (UPI) links of up to 10.4 G/s
Note: Both CPUs need to be installed for full access to the PCIe slots, DIMM slots, and onboard controllers. Refer
to the block diagram on page 18 to determine which slots or devices may be affected.
Memory
•
The X11DSF-E supports up to 6TB of 3DS LRDIMM/LRDIMM/3DS RDIMM/RDIMM/NV-DIMM DDR4 ECC 2933*/
2666/2400/2133 MHz memory in 24 memory slots.
Notes: 1. Support for 2933MHz memory is dependent on the CPU SKU. 2. Up to 9TB memory is supported with
DCPMM modules installed based on the DCPMM population table on page 37.
DIMM Size
•
Up to 128GB at 1.2V
Note 1: Memory speed support depends on the processors used in the system.
Note 2: For the latest CPU/memory updates, please refer to our website at http://www.supermicro.com/products/
motherboard.
Chipset
•
Intel® C627 chipset
Expansion Slots
•
2 PCIe x32 Tray cable connector interface (GPU, NVMe, M.3 or Ruler down device support)
•
1 PCIe 3.0 (x16 + x16 or x16 + QAT) left riser card support
•
1 PCIe 3.0 x4 and 1 PCIe x4 from PCH
Network
•
Dual 10GBase-T Ethernet ports with Intel X550
BaseBoard Management Controller (BMC)
•
ASPEED AST 2500 Baseboard Management Controller (BMC) supports IPMI 2.0
•
One (1) dedicated IPMI LAN located on the rear IO backpanel
Graphics
•
Graphics controller via ASPEED AST2500
I/O Devices
•
Serial (COM) Port
Note: The table above is continued on the next page.
Motherboard Features
•
One (1) serial-port header
14
Advertisement
Table of Contents
