Table of Contents
Advertisement
Check and clear of the faults history
(2) Clearing procedure
POINT
· The faults history can be cleared by setting "1" in Er.CL Faults history clear.
1.
Screen at power-ON
The monitor display appears.
2.
Press
setting mode.
3.
Turn
appears.
4.
Press
"
"(initial value) appears.
5.
Turn
it to the setting value " ".
6.
Press
330
Operation
to choose the parameter
until
(faults history clear)
to read the present set value.
to change
to set.
· Press
to read another parameter.
· Press
to show the setting again.
· Press
twice to show the next parameter.
Display
Flicker ··· Faults history clear complete!!
The parameter
number previously
read appears.
Advertisement
Table of Contents
